Last update on 2023-02-10 / Affiliate links / Images from Amazon Product Advertising API
Contents
1. NAGU Tool Rest Post 5/8″ Diameter X 3-3/4″ Long For Modular Tool Rest System
- hardening allowable steel: made of precision grinding, polishing and hardening allow the steel to have a long service life, use and vibration-free rotation
- 6 different rests are available: suitable for 4″, 6″, 12″ & small, large, s bowl/box holder tool holder rod
- make sure this fits
by entering your model number. - quick replacement of the column: the column is screwed into the bracket, which can be easily disassembled and connected to different accessories.
- suitable for most lathes: choose for your latheproper length tool holder. measure the diameter of the post and the length from the bottom of the post to the top of the tool holder. to ensure that the size you buy is correct, please compare your measurement with the “assembly height” of the tool holder system.
- conical spring washers: avoid loosening heavy vehicles
2. Robert Sorby # 766/6 6″ Long X 3/4″ Diameter Tool Rest Cross Bar For Modular Tool Rest System
- made of precision ground polished and hardened permissible steel
- 6″ long x 3/4″ diameter tool rack crossbar
- made in the uk by robert sorby
- make sure this fits
by entering your model number. - rod interface and 6 different brackets: 4″, 6″ and 9″, internal and external curves and a box platform
- the modular tool holder system enables the lathe to build a series of tool holders, andno need to spend too much money
3. 1″ X 8″ Post For Module Tool Rest System
- interchangeable tools rest available
- economical modular system
- long-life solid steel
- make sure this fits
by entering your model number.
4. NAGU Tool Rest Post 1″ Diameter X 5″ Long For Modular Tool Rest System
- quick change of the column: the column is screwed into the bracket, can be easily disassembled and connected to different accessories.
- applicable to most lathes: choose a tool holder of the right length for your lathe.measure the diameter of the post and the length from the bottom of the post to the top of the tool holder.to ensure that the size you buy is correct, please compare your measurements with the “assembly height” of the tool holder system.
- hardened allowable steel: made of precision ground, polished and hardened allowable steel, long service life, vibration-free turning.
- make sure this fits
by entering your model number. - 6 different rests are available: suitable for 4″, 6″, 12″ & small, large, s bowl/box rack tool rack rod.
- conical springwasher: avoid loose and heavy rotation.
5. Robert Sorby # L765/S25 25 Mm Diameter X 4-3/4 Inch Long Stem Post For Modular Tool Rest System
- make sure this fits
by entering your model number. - the modular tool holder system enables the lathe to build a series of tool holders without spending too much
- 25 mm diameter stem is 4-3/4 inches long
- made of precision ground and hardened permissible steel
- the stem interface has 6 different tool holders: 4″, 6″ and 9″, internal and external curves, and a box-shaped platform
- made in the uk by robert sorby
6. Robert Sorby # 765/24 1 Inch Diameter X 4-3/4 Inches Long Stem Post For Modular Tool Rest System
- made of precision ground, polished and hardened permissible steel
- rod interface with 6 different rests: 4″, 6″ and 9″, internal and external curves, and a box platform
- modular tool holder system enables turning workersable to build a series of tool holders without spending a lot of money
- make sure it fits
by entering your model number. - made in the uk by robert sorby
- 1 inch diameter stem length 4-1/2”
7. Robert Sorby # 765/16 5/8 Inch Diameter X 3-1/2 Inches Long Stem Post For Modular Tool Rest System
- made of precision polished and hardened steel
- rod interface with 6 different breaks: 4″, 6″ and 9″, internal and external curves and a box platform
- the 5/8” diameter rod is 3-1/2” long
- make sure this fits
by entering your model number. - made in the uk by robert sorby
- the modular tool holder system enables the turner to build a series of tool holders without spending a lot of money
8. Robert Sorby # L765/S28 1-1/8 Inch Iameter X 5 Inch Long Stem Post For Modular Tool Rest System
- make sure this fits
by entering your model number. - made in the uk by robert sorby
- rod interface with 6 different breaks: 4″, 6″ and 9″, internal and external curves and a box platform
- made by precisionmade of ground, polished and hardened steel
- the modular tool rack system enables the lathe to set up a set of tools without spending a lot of money.
- 28 mm (1-1/8 inch) diameter valve stem is 5 inches long
9. NAGU Tool Rest Bar 12″(304Mm) With Hardened Steel Rod For Modular Tool Rest
- interchangeable tool bar: suitable for nagu 5/8 x 3-1/4″, 1″ x 5″ and 1×8″ tool bar
- anti-rust rod: made of stainless steel, long service life, preventing wet wood from rusting
- smooth tool operation: the tool can easily slide on the rod, made of hard steel, so there is no need to file frequently.
- suitable for most lathes: 12″/304mm length tool holder is very suitable for turning larger workpieces. provides more sliding surfaces without re-adjustment.
- ensure fit
by entering your model number. - hardened steel bar: tool holder is made of solid steel. with hardened steel bars on the top, it will not produce scratches, dents, and will remain smooth after many years of use. it is only sold as a tool rack, not including tool racks.
10. NOVA 71064 Bowl Rest, Large 8-1/2″ Diameter Curve
11. NAGU Tool Rest Bar 4″/101Mm With Hardened Steel Rod For Modular Tool Rest
- smooth tool operation: the tool can easily slide on the rod and is made of hard steel, so there is no need for frequent filing.
- interchangeable tool holder: suitable for nagu 5/8 x 3-1/4″, 1″ x 5″ and 1×8″ tool holder
- hardened steel bar: the tool holder is made of solid steel.there is a hardened steel rod on the top, there will be no nicks, dents, and it will remain smooth after many years of use.sold as a tool rack only, not including tool racks.
- anti-rust rod: made of stainless steel, long service life, prevent wet wood from rusting
- make sure this fits
by entering your model number. - suitable for most lathes: 4″/101mmthe length tool holder is very suitable for turning the workpiece, even if the other part of the workpiece is wider, it can let you dive closer.
12. Robert Sorby #767E 9 Inches Long X 3/4 Inch Diameter External Tool Rest Cross Bar For Modular Tool Rest System
- rod interface and 6 different tool holders: 4″, 6″ and 9″, internal and external curves, and a box platform
- the modular tool holder system enables the turner to build a series of tool holders without spending too much
- 9″ long x 3/4″ diameter external tool holder crossbar
- made of precision ground and hardened permissible steel
- make sure this fits
by entering your model number. - made in the uk by robert sorby
