Last update on 2023-02-12 / Affiliate links / Images from Amazon Product Advertising API
Contents
1. Kenwood Excelon X801-5 5-Channel Car Amplifier
- class a/b full-frequency stable 5-channel amplifier
- pulse width modulation mosfet power supply
- 3 protection circuits (heat, overload and speaker short-circuit protection)
- rms rated power: 4 ohms: 50 watts x 4 channels./ 2 ohm: 75 watts x 4 channels./ bridge: 4 phms: 150 watts x 2 channels.
- total power output: 1600 watts
2. Kenwood XR901-5 Excelon 900-Watt 5-Channel Amplifier
- special capacitors and inductors have been carefully selected for the lc filter of the digital amplifier, which is essential for achieving high-resolution audio.
- make sure this fits
by entering your model number. - through the use of a downward-fired subwoofer and superior technology, the audio system produces high-quality sound and powerful bass while still being compact.
3. Kenwood XH901-5 5-Channel Class-D Power Amplifier
- make sure it fits
by entering your model number. - 2ω stable
- class d power amplifier
- 5 channels (a/ b/ subwoofer)
- 60w x 4 + 400w x 1 rms power output
4. Kenwood X8025 5-Channel Power Amplifier
- all terminals and connections are on one side for easy installation and cleaning.
- make sure this fits
by entering your model number. - the detachable sliding terminal cover has a stylish design and is more convenient to install.include
- speaker level input wiring harness, used to connect from the factory-installed receiver to the speaker wire.
- the output coil with magnetic shield prevents the magnetic flux from radiating from the coil of the subwoofer, thereby reducing noise and improving sound quality.
- high-resolution audio is a high-quality sound that exceeds the cd standard.high-resolution audio captures and beautifully expresses all the details of your favorite music.immerse yourself in a rich and high-quality sound experience through ultra-high and low frequencies.
5. Kenwood Kac-M8005 5-Channel Power Amplifier
- amplifier that complies with cea-2006
- kac-m8005-kenwood 5channel 1600w maximum conformal coating can bridge marine power amplifier
- dimensions: 9″wx 7 3/8″lx 2 3/16″h
- rms rated power: 4 ohms: 50 watts x 4 channels. + 300 watts x 1 channel. 2 ohms: 75 watts x 4 channels. + 500 watts x 1 channel. bridge, 4 ohms: 150 watts x 2 channels. + not applicable
- total power output: 1600 watts
6. Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier
- 500 watts rms x 1 in 4 ohms (1,000 watts x 1 in 2 ohms)
- speaker level input, signal induction turned on
- d-type amplifier design
- mono subwoofer amplifier
- variable low-pass filter (50-200 hz, 24 db per octave)
7. Kenwood KAC 5207 Stereo Power Amplifier 500 Watts Max
- frequency response 20hz-50khz
- power output 70wattsrms x 2 at 4 ohms maximum power: 500w
- dimensions (wxhxd) 230 [mm] x 56 [mm] x 167 [mm] 9-1/16 inches x 2-3/16 inches x 6-9/16 inches
- signal-to-noise ratio 100db (reference: rated power at 14.4v is 4ohms)
8. Kenwood Excelon X500-1 1000 Watts Class D Amplifier
- bass enhancement 40hz+18db
- dimensions (width x height xd): 9″x 2-3/16″x 8-3/8″
- 300 watts rms x 1 4 ohms (500 watts rms x 1 2 ohms)
- variable low-pass filter (50-200[hz],24db/oct)
- d-type mono power amplifier
9. Kenwood Excelon P-XR600-6DSP 6-Channel Car Amplifier With Digital Signal Processing And Maestro AR Interface
- many new cars equipped with advanced amplification systems are almost impossible to replace, and it is difficult to upgrade the audio performance. when xr600-6dsp is used in combination with idatalink maestro ar, it can use the real stereo signal from the existing oem stereo and convert all the can-bus communication of the original radio to xr600-6dsp. it integrates with many chrysler, dodge, fiat, ford, jeep, lexus, maserati, ram, subaru and toyota advanced systems, and many more vehicles are available.
- these hexagonal terminals can accommodate up to awg 4-awg 6 batteries and the thickness of the ground wire to better maintain the voltage of the vehicle battery. the hexagonal design allows maximum tightening and contact with wires.
- the 32-bit 192khz dsp provides the flexibility of independent tuning and equalization, which is the flexibility required for the speakers and location challenges used in a typical system. channel flexibility allows any function or tuning on all 10 channels, making it one of the most versatile solution-based amplifiers on the market today.
- these hexagonal terminals can accommodate up to awg 8-awg 12 speaker wire thickness in order to better transmit the signal to the speaker. the hexagonal design allows maximum tightening and contact with wires.
- use kenwood dsp control application (compatible with iphone and android) to set xr600-6dsp. you can set the listening position, advanced equalization and filtering during the installation process, and store the settings in the memory. simplified mode is available for daily use.
10. Kenwood X700-5 – 700W 5-Channel Amplifier
- 5-channel car amplifier
- compliant with cea-2006
- 100 watts rms x 2 bridged 4 ohms + 500 watts rms x 1 2ohm
- variable low-pass filter on the subwoofer channel (50-200 hz 24 db per octave)
- 50 watts rms x 4 at 2 ohms + 500 watts rms x 1 at 2 ohms
- independent variable high-pass filters on the front and rear channels (50-200hz, 12 db/octave)
- 40 watts rms x 4 in 4 ohms + 300 watts x 1 in 4 ohms
11. Kenwood Excelon XR1000-1 Mono Digital Power Amplifier
- rms power: 500 watts x 1 @ 4ohms
- mono digital power amplifier
- rms power: 1000watts x 1 @ 2ohms
- maximum power: 2000watts
12. JL Audio XD700/5V2 5-Channel Car Amplifier – 75 Watts RMS X 4 At 4 Ohms + 300 Watts RMS X 1 At 2 Ohms
- 5 channel car amplifier
- 200 watts rms x 2 bridged 4 ohms + 300 watts rms x 1 2 ohms
- 75 watts rms x 4 + 180 watts rms x 1 (4 ohms)
- 100 watts rms x 4 + 300 watts rms x 1 (in 2 ohms)
- 10-1/4″wx 2-1/16″hx 7-1/8″d
