Home » Reviews » Top 12 Best Ge Home Automation Systems 2022

Top 12 Best Ge Home Automation Systems 2022

Last update on 2022-11-11 / Affiliate links / Images from Amazon Product Advertising API

1. GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White And Lt. Almond, Zwave Hub Required, Works With Smartthings, Wink, And Alexa, 26931

  • whole home coverage – z-wave plus applies to all previous z-wave generations allowing continued expansion of your home automation network. the switch can control indoor or outdoor equipment to automate the entire home, and repeat the z-wave signal from a hub or other equipment to extend your range to 150 feet. the extended signal range increases your home automation coverage to enhance your control.
  • make sure this fits
    by entering your model number.
  • easy to install – hard-wired connections are required for indoor in-wall installation. need a neutral wire. includes white and light-colored almond cover buttons (excluding wall panels). suitable for all led, cfl, incandescent and halogen bulbs and other equipment. operating temperature range is 32-104 degrees fahrenheit.
  • voice control-alexa & compatible with google assistant (requires a z-wave certified hub). it can be used with the following z-wave certified hubs: smartthings, bell alarm, blink, adt pulse, adt command, trane, vivint, nexia, honeywell, home seer, harmony home hub extender, vera, etc.
  • optional motion control-personalized switch with three motion detection options-occupied, vacant and manual. the occupancy mode automatically turns on/off the lights, while in the vacant setting, the lights are turned on and off automatically. to deactivate the motion sensor, select manual operation. with five timeout duration options ranging from 5 seconds to 30 minutes and a detection coverage range of up to 180 degrees, the switch can adapt to any room with different activities. in addition, when connected to a compatible hub, you can enjoy customized scenes, multi-functional schedules, and convenient alarms through remote operation and voice control.
  • please refer to the user guide below for better use
  • 3-way ready-smart device can run perfectly on its own or seamlessly integrate into a multi-switch setup with additional switches required-model 12723, 12728, 46199, or 46200. up to four additional switches can be connected to the same device. voltage: 120 volts

ge home automation systems GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931

2. Enbrighten Almond Z-Wave Plus Smart Light Switch With Quickfit And Simplewire, 3-Way Ready, Compatible With Alexa, Google Assistant, Zwave Hub Required, Repeater/Range Extender, Toggle, 14293

  • voice control——alexa & google assistant compatible (z-wave certified hub required) can be used with the following z-wave certified hubs smartthings ring alarm wink adt pulse adt command trane vivint nexia honeywell homeseer harmony home hub extender vera etc.
  • ## make sure this fits
    by entering your model number.
  • multifunctional application—— when connected to a compatible hub, use a smart phone and voice commands to remotely control the device or enjoy the manual on/off operation of the switch, personalize scheduling through custom scenarios and conveniently remind smart home automation is simple, and the device can run perfectly on its own, or seamless integration into a multi-switch setup with the required additional switches-model 12728 or 46200 can connect up to four additional switches to the same device
  • # ## advanced design second-generation model-compared with the previous z-wave model, the improved components reduce the depth of the shell by 20%, and no heating plate is required for quick installation. the enhanced function is the old switch box ideal smart solution configuration for multiple groups or any other applications with limited space. automatic line load sensing terminals support quick and easy installation by detecting lines and load lines and configuring dimmers accordingly. offset dual grounding ports to avoid switch box installation the screw supports the daisy chain setting in the multi-switch to improve convenience. the optional switchable backlight provides soft light and can be turned off or always on according to your indicator. the indoor wall installation where the wiring is connected to the neutral wire does not include wall panels. it is suitable for all led cfl incandescent lamps and halogen bulbs and other equipment with a working temperature range of 32-104 degrees fahrenheit
  • full-home coverage – z-wave plus can be used with all previous z-wave versions to allow your home automation network to continue to expand. the switch can control indoor or outdoor equipment to automate the entire home, and extend your range up to 150 feet from your hub or repeat your z-wave signal from other devices. expand the signal range to increase your home automation coverage to enhance your control#

ge home automation systems Enbrighten Almond Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, Toggle, 14293

3. Enbrighten Z-Wave Smart Rocker Light Dimmer, 3-Way Ready, Works With Alexa, Google Assistant, Zwave Hub Required, Repeater/Range Extender, White & Light Almond, 46203 + 1 Add-On Rocker Switch 46199

  • space-saving shell design-compared with the previous z-wave model, the improved components reduce the shell depth by 20%, and no heating plate is needed. the quick installation enhancement is an ideal smart solution for old switch boxes, multi-group configurations or any other applications with limited space.
  • all-in-one bundle-the kit contains everything you need to convert a traditional 3-way switch into a smart dimmer. the ge brand additional switch allows the ge brand z-wave smart dimmer to operate correctly in a multi-switch installation and reflects the function of the main switch.
  • requires z-wave certified gateway-compatible with the following z-wave certified hubs: smartthings, wink, adt pulse, trane, vivian, nexia, honeywell, home seer, harmony home hub extender, vera and connect . use with alexa for voice control (requires a hub; alexa device and hub are sold separately).
  • alexa compatible-requires an alexa-enabled hub for voice control with echo products (alexa devices and hubs are sold separately). echo plus cannot be directly connected (only zigbee products can be directly connected to echo plus). arrange, control and adjust the brightness of any dimmable wall or ceiling lights wirelessly-use any mobile device to control it anytime, anywhere. supported voltage-120vac. wireless range: up to 150 feet
  • easy installation with simple wires-the automatic line load sensing terminal on the dimmer supports quick and easy installation by detecting the line and load wires and configuring the dimmer accordingly. dual grounding ports, offset to avoid switch box installation screws, support daisy chain in multi-switch settings. operating temperature range: 32-104° f (0-40° c)
  • ensure fit
    by entering your model number.

ge home automation systems Enbrighten Z-Wave Smart Rocker Light Dimmer, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 46203 + 1 Add-On Rocker Switch 46199

4. GE Enbrighten Smart In-Wall Paddle Add-On Switch With Quickfit And Simplewire 3-Way Kit, Z-Wave Hub Required, Works With Ring Alarm, Alexa And More, 47863, White & Light Almond

  • make sure this fits
    by entering your model number.
  • easy installation with simple wires-the automatic line load sensing terminal on the switch supports quick and easy installation by detecting the line and load wires and configuring the switch accordingly. dual ground port offset to avoid switch box installation screws, support daisy chain in multi-switch settings.
  • requires z-wave certified gateway-compatible with the following z-wave certified hubs: smartthings, wink, adt pulse, trane, vivint, nexia, honeywell, homeseer, harmony home hub extender, vera and connect. use with alexa for voice control (requires a hub; alexa device and hub are sold separately).
  • all-in-one bundle-the kit contains everything you need to convert a traditional 3-way switch into a smart switch. the enbrighten brand additional switch allows the enbrighten brand z-wave smart switch to operate correctly in a multi-switch installation and reflects the function of the main switch.
  • space-saving shell design-compared with the previous z-wave model, the improved components reduce the shell depth by 20% and no longer need a heating plate. the quick installation enhancement is an ideal smart solution for old switch boxes, multi-group configurations or any other applications with limited space.
  • alexa compatible – requires an alexa-enabled hub for voice control with echo products (alexa devices and hubs are sold separately). echo plus cannot be directly connected (only zigbee products can be directly connected to echo plus). use any z-wave certified gateway to wirelessly control the on/off function of overhead lighting via your mobile device or computer. supported voltage-120vac. wireless range: up to 150 feet

ge home automation systems GE Enbrighten Smart in-Wall Paddle Add-On Switch with QuickFit and SimpleWire 3-Way Kit, Z-Wave Hub Required, Works with Ring Alarm, Alexa and More, 47863, White & Light Almond

5. GE Enbrighten Add-On Switch For GE Z-Wave/GE Zigbee Smart Lighting Controls, Works With Alexa, Google Assistant, NOT A STANDALONE SWITCH, White & Light Almond, 12723

  • ultimate flexibility – compatible with any ge brand smart control, and can operate lights or devices from multiple locations. additional switches send commands to connected in-wall z-wave or zigbee switches, dimmers, or fan controls to take full advantage of home automation features in a 3-way configuration. in order to facilitate installation, the additional switch only needs neutral wire, traveller and ground wire. it cannot be used as a standalone switch.
  • make sure this fits
    by entering your model number.
  • why use additional switches – additional switches allow ge-branded in-wall smart controls to operate correctly in a multi-switch configuration. by connecting directly to the smart device, the add-on reflects its function. this function allows you to dim the light, adjust the fan speed, turn on/off the lights, etc. according to the functions of the main smart device. although the additional switch is not a standalone device, it allows you to continue to use your favorite smart device functions from multiple locations.
  • easy to install-hard-wired connections are required for indoor in-wall installation. need a neutral wire. includes white and light-colored almond paddles (excluding wall panels). it can be used with led, cfl, incandescent and halogen bulbs and other lamps based on the main equipment functions.
  • compatible devices-additional switches reflect the functions of the main smart device. it provides on/off control when paired with a switch, dims when connected to a dimmer, and adjusts speed when used with fan control and many other home automation commands.
  • multi-switch operation-easily replace any in-wall control in a multi-switch configuration to support the functions of the main smart device connected to it. up to four additional switches can be added to the smart switch or dimmer to operate the light fixture from up to five positions.

ge home automation systems GE Enbrighten Add-On Switch for GE Z-Wave/GE Zigbee Smart Lighting Controls, Works with Alexa, Google Assistant, NOT A STANDALONE SWITCH, White & Light Almond, 12723

6. C By GE 3-Wire On/Off Paddle Style Smart Switch With Bluetooth And Wi-Fi, No Neutral Wire Required, Alexa And Google Home Compatible Without Hub, 1-Pack (Packaging May Vary)

  • use smart bulbs that can be used with alexa / google home to build your smart home: cync and c by ge smart bulbs and smart switches always support voice and application control, even if the wall switch is turned off. ##
  • make sure this fits
    by entering your model number.
  • make traditional bulbs into smart bulbs: the c by ge wi-fi switch allows you to easily make the bulb compatible with google home or amazon alexa when paired with a smart device.
  • # c by ge smart light switch: smart bulbs and light switches are ready to respond at any time, bringing convenience and comfort. with enhanced features, such as being out of family control and scheduling, you will never return to the dark house.
  • smart light switch: c by ge smart light switch allows you to control your lights by touch, cync mobile app or voice assistant. use google home or alexa (sold separately), c by ge’s light switch makes light control easy.
  • easy to use in any home: this smart light switch is suitable for the most common residential wiring (requires ground wire), no neutral wire is required. the diy installation of this smart switch for incandescent, halogen and led lights takes about 30 minutes.

ge home automation systems C by GE 3-Wire On/Off Paddle Style Smart Switch with Bluetooth and Wi-Fi, No Neutral Wire Required, Alexa and Google Home Compatible Without Hub, 1-Pack (Packaging May Vary)

7. JAS12724 – GE 12724 Z-Wave(R) In-Wall CFL-LED Dimmer Switch

  • use the dimmer switch controlled by ge z-wave to easily replace any standard in-wall switch to use any z-wave certified gateway to turn on/off the lighting or adjust the brightness level through a mobile device or computer.
  • screw terminal installation can improve space efficiency when replacing existing switches. neutral connection required for installation.
  • requires z-wave certified gateway-compatible with the following z-wave certified hubs: pulse, trane, wink, alexa via samsung smartthings hub, nexia, honeywell, homeseer, smart security, harmony home hub extender, vera, connection and iris. please note: please refer to the user manual and instructional video before use.
  • the dimmer allows you to wirelessly arrange, control and adjust the brightness of any hard-wired, dimmable lights in your home at any time of the day. you can control multiple light groups or turn on or off in indoor ambient lighting scenes.
  • alexa compatible-requires alexa-enabled hub for voice control with echo products (alexa devices and hubs are sold separately). echo plus cannot be directly connected (only zigbee products can be directly connected to echo plus).
  • make sure this fits
    by entering your model number. compared with flying wires,
  • used with alexa for voice control (requires a hub, alexa device and hub are sold separately).

ge home automation systems JAS12724 - GE 12724 Z-Wave(R) in-Wall CFL-LED Dimmer Switch

8. GE Enbrighten Add-On Switch Quickfit And Simplewire, In-Wall Toggle, Z-Wave Zigbee Wireless Smart Lighting Controls, Latest Version, NOT A STANDALONE Switch, 46200

  • commercial and residential applications-supports 120vac and 277vac, which can be used universally in various systems. the switch is suitable for ordinary household 120vac or light commercial 277vac applications. must be paired with 277vac smart device (model 43074) for light commercial use. easily replace any in-wall control in the multi-switch configuration to remotely turn on or off various lamps and set programs.
  • make sure this fits
    by entering your model number.
  • ultimate flexibility-compatible with any ge brand smart control, and can operate lights or devices from multiple locations. additional switches send commands to connected in-wall z-wave or zigbee switches, dimmers, or fan controls to take full advantage of home automation features in a 3-way configuration. in order to facilitate installation, the additional switch only needs neutral wire, traveller and ground wire. it cannot be used as a standalone switch.
  • advanced design of the second-generation model-compared with the previous model, the improved components reduce the depth of the housing by 20%, and no need for a broken piece. the quick installation enhancement is an ideal smart solution for old switch boxes, multi-group configurations or any other applications with limited space. dual ground port offset to avoid switch box installation screws, support daisy chain in multi-switch settings.
  • why use additional switches – additional switches allow ge-branded in-wall smart controls to operate correctly in a multi-switch configuration. by connecting directly to the smart device, the add-on reflects its function. this function allows you to dim the light, adjust the fan speed, turn on/off the lights, etc. according to the functions of the main smart device. although the additional switch is not a standalone device, it allows you to continue to use your favorite smart device functions from multiple locations.
  • easy to install-hard-wired connections are required for indoor in-wall installation. need a neutral wire. does not include wall panels. it can be used with led, cfl, incandescent and halogen bulbs and other lamps based on the main equipment functions.

ge home automation systems GE Enbrighten Add-On Switch QuickFit and SimpleWire, In-Wall Toggle, Z-Wave ZigBee Wireless Smart Lighting Controls, Latest Version, NOT A STANDALONE Switch, 46200

9. GE Enbrighten Add-On Switch With Quickfit And Simplewire, GE Z-Wave/GE Zigbee Smart Lighting Controls, Compatible With Alexa, Google Assistant, NOT A STANDALONE SWITCH, Ivory, 47188

  • make sure this fits
    by entering your model number.
  • why use additional switches – additional switches allow ge-branded in-wall smart controls to operate correctly in a multi-switch configuration. by connecting directly to the smart device, the add-on reflects its function. this function allows you to dim the light, adjust the fan speed, turn on/off the lights, etc. according to the functions of the main smart device. although the additional switch is not a standalone device, it allows you to continue to use your favorite smart device functions from multiple locations.
  • advanced design of the second generation model-compared with the previous model, the improved components reduce the depth of the shell by 20%, and no more fragments are required. the quick installation enhancement is an ideal smart solution for old switch boxes, multi-group configurations or any other applications with limited space. dual ground port offset to avoid switch box installation screws, support daisy chain in multi-switch settings.
  • commercial and residential applications-supports 120vac and 277vac, which can be used universally in various systems. the switch is suitable for ordinary household 120vac or light commercial 277vac applications. must be paired with a 277vac smart device (model 43072 or 43074) for light commercial use. easily replace any in-wall control in the multi-switch configuration to remotely turn on or off various lamps and set programs.
  • easy to install-hard-wired connections are required for indoor in-wall installation. need a neutral wire. only ivory paddles. does not include wall panels. it can be used with led, cfl, incandescent and halogen bulbs and other lamps based on the main equipment functions.
  • ultimate flexibility-compatible with any ge brand smart control, you can operate lights or devices from multiple locations. additional switches send commands to connected in-wall z-wave or zigbee switches, dimmers, or fan controls to take full advantage of home automation features in a 3-way configuration. in order to facilitate installation, the additional switch only needs neutral wire, traveller and ground wire. it cannot be used as a standalone switch.

ge home automation systems GE Enbrighten Add-On Switch with QuickFit and SimpleWire, GE Z-Wave/GE Zigbee Smart Lighting Controls, Compatible with Alexa, Google Assistant, NOT A STANDALONE SWITCH, Ivory, 47188

10. Enbrighten 55249 Z-Wave Plus Smart Switch Plug-In, 2 Simultaneously Controlled Zwave Outlets, Works With Alexa, Google Assistant, Repeater/Range Extender Hub Required, 1 Pack, White

  • dual socket-use any mobile device to wirelessly arrange and control two lights or small appliances anytime and anywhere. the smart switch contains two grounded z-wave control sockets, allowing two devices to be operated remotely at the same time (cannot be controlled separately).
  • voice control-alexa & is compatible with google assistant (requires a z-wave certified hub). it can be used with the following z-wave certified hubs: smartthings, bell alarm, blink, adt pulse, adt command, trane, vivint, nexia, honeywell, homeseer, vera, etc.
  • easy operation – when connected to a compatible hub, use a smartphone and voice commands to remotely control the device, or enjoy the manual on/off operation of the switch. with custom scenarios, multi-function scheduling and convenient alarms, home automation becomes simple.
  • make sure this fits
    by entering your model number.
  • easy to install-no wiring required. just plug in the device and connect to your hub to use the convenient on/off function. the space-saving design allows the second socket to continue to be used and can be easily installed behind furniture. suitable for all led, cfl, incandescent and halogen bulbs and other equipment. operating temperature range is 32-104 degrees fahrenheit.
  • whole house coverage – z-wave plus can be used with all previous z-wave versions to continue to expand your smart home network. the switch can control the entire home automation indoor equipment.

ge home automation systems Enbrighten 55249 Z-Wave Plus Smart Switch Plug-In, 2 Simultaneously Controlled ZWave Outlets, Works with Alexa, Google Assistant, Repeater/Range Extender Hub Required, 1 Pack, White

11. GE Enbrighten Add-On Switch For GE Z-Wave/GE Zigbee Smart Lighting Controls, Works With Alexa, Google Assistant, NOT A STANDALONE SWITCH, Toggle, 12728

  • why use additional switches – additional switches allow ge-branded in-wall smart controls to operate correctly in a multi-switch configuration. by connecting directly to the smart device, the add-on reflects its function. this function allows you to dim the light, adjust the fan speed, turn on/off the lights, etc. according to the functions of the main smart device. although the additional switch is not a standalone device, it allows you to continue to use your favorite smart device functions from multiple locations.
  • easy to install-hard-wired connection is required for indoor in-wall installation. need a neutral wire. does not include wall panels. it can be used with led, cfl, incandescent and halogen bulbs and other lamps based on the main equipment functions.
  • requires ge home automation switch. this is not an independent switch. (this product is an additional switch only, and requires the existing ge home automation switch to operate. without the ge home automation switch, the additional switch will not work.)
  • ultimate flexibility – compatible with any ge brand smart control, and can operate lights or devices from multiple locations. additional switches send commands to connected in-wall z-wave or zigbee switches, dimmers, or fan controls to take full advantage of home automation features in a 3-way configuration. in order to facilitate installation, the additional switch only needs neutral wire, traveller and ground wire. it cannot be used as a standalone switch.
  • compatible devices-the addition of the -on switch reflects the main smart device function. it provides on/off control when paired with a switch, dims when connected to a dimmer, and adjusts speed when used with fan control and many other home automation commands.
  • multi-switch operation-easily replace any in-wall control in a multi-switch configuration to support the functions of the main smart device connected to it. up to four additional switches can be added to the smart switch or dimmer to operate the light fixture from up to five positions.
  • make sure this fits
    by entering your model number.

ge home automation systems GE Enbrighten Add-On Switch for GE Z-Wave/GE Zigbee Smart Lighting Controls, Works with Alexa, Google Assistant, NOT A STANDALONE SWITCH, Toggle, 12728

12. GE Mytouchsmart Wifi Smart Light Dimmer, 3-Way/Single Pole, Works With Alexa, Google Assistant, 2.4Ghz, No Hub Needed, Neutral Wire Required, White & Light Almond, 40794

  • easy settings-one-click presets, personalized my on/off time and custom countdown options are easy to program and support any schedule.
  • voice command-compatible with alexa and google assistant, you can easily realize the hands-free convenience of voice control without a hub.
  • universal wi-fi – use your 2. 4ghz wi-fi network for scheduling, full range dimming and on/off operations from anywhere.
  • quick installation-space-saving screw terminals and metal yoke support quick and reliable installation-neutral wire is required.
  • user-friendly application-the easy-to-use mytouchsmart application can be used in the apple app store and google play. it can easily remotely operate dimmable led and cfl as well as incandescent and halogen bulbs.
  • make sure this fits
    by entering your model number.

ge home automation systems GE myTouchSmart WiFi Smart Light Dimmer, 3-Way/Single Pole, Works with Alexa, Google Assistant, 2.4GHz, No Hub Needed, Neutral Wire Required, White & Light Almond, 40794