Last update on 2022-09-22 / Affiliate links / Images from Amazon Product Advertising API
1. Channel Master Ultra Mini 4 TV Antenna Amplifier, TV Antenna Signal Booster With 4 Outputs For Connecting Antenna Or Cable TV To Multiple Televisions (CM-3414),White
- powder coating and weatherproof housing allow indoor or outdoor installation in any climate
- suitable for all tv antennas andcable installation (not compatible with satellite)
- mini size for space saving
- four amplified output ports (8 db)
- improve signal strength, reduce pixelation and possibly increase the number of channels
2. 9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier With Active Return Zero Signal Loss Voip Telephone Bypass Port And F59 Terminators Antronix VR900B/AC
- 6 kv surge protection and ptc short circuit protection ul listed adapters-provide unique surge protection on all rf ports.self-reset circuit protection provides safe short-circuit protection.
- compared with electronic eda-ft08300 or pct vc9u.provide 8 amplified output ports with source return.all ports are lossless in forward and reverse directions.this is a true lossless 8-port splitter.
- the modem port provides a connection point for the voip device, and the power failure does not affect the business.compatible with all standards and digital cable tv services, including the “triple play” telephone service.
- powder-coated aluminum housing-provides the most corrosion-resistant salt spray and rust protection.the amplifier is only provided with a 5-year manufacturer’s warranty-not the power supply.the connecting cable is not included.including three f59 terminator.
- all models are equipped with a cam port to automatically capture the f port.the configuration with all ports facing down provides clean cabling in any direction.
3. Professional RF Cable TV Signal Amplifier With High 50Db Gain
- professional-grade cable tv and antenna signal amplifier, output level up to 50db. supports tv coaxial cable signals from cable sockets, cable boxes, antennas, dtv, cctv dvr, matv or all other radio frequency modulated tv systems. designed for large multi-dwelling units (mdu) that require precise rf amplification and gain and slope adjustment for professional installation.
- high-power amplification to compensate for the attenuation of passive tv distribution components (such as cables, taps, splitters and cable outlets). the advanced catv hybrid circuit provides extremely low noise figure and minimal distortion. adjustable gain control and tilt control can easily achieve system balance.
- adjustable gain/attenuation to reduce overdrive. adjustable tilt compensation allows large catv systems to be properly balanced and mixed with other catv or existing rf distribution systems. supports a complete tv frequency range from 40mhz to 860mhz for analog/digital cable tv, uhf and vhf channels.
- solutions to the problems of noise, interference and weaknesses after distribution. if the rf tv source signal has a strength of 70/75db, you can easily boost the rf coaxial signal by more than 2100 feet or 650 meters. improve the signal strength of existing cable tv or antennas to reach longer distances while minimizing losses, thereby realizing more tv distribution.
- anti-interference module design, built-in advanced noise filter. provide -20 db output/input test port for easy troubleshooting. lightning protection with built-in ac fuse for high-voltage surge events. the aluminum chassis provides excellent heat dissipation and long-term durability.
4. 4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter With Passive Return, Coax Cable, F59 Terminators (Antronix MRA4-8)
- compatible with all standard and digital cable tv services, ota antenna reception. it is not compatible with the existing amplifier or pre-amplifier system. exceeds all scte standards.
- 6 kv surge protection to prevent lightning strikes. the nickel-plated shell provides excellent protection against salt spray and rust. 5-year warranty (amplifier only).
- the four-port amplifier with passive return path adds +7.5 db per port. use digital cables to reduce snow and prevent image pixelation, and enhance antenna (ota) signals for distribution to multiple tvs. may improve the performance of the cable modem. may improve hdtv reception.
- 3 db noise figure provides clean amplification of weak signals to overcome the poor noise figure in tv tuners and converters. 6 kv combined wave surge protection there is a unique surge protection on all ports.
- ptc short-circuit protection ul listed adapters-self-resetting circuit protection provides safe short-circuit protection to minimize power outages. including amplifier, power supply, 36 inch coaxial cable and two 75 ohm port terminator.
5. 4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer With Passive Return, F59 Terminators (Lindsay LSA84-EQ8)
- the amplifier includes an integrated equalizer that can change the amplifier gain. the equalizer provides more amplification for high-frequency signals, which tends to become weaker in long cable runs. all ports provide amplified signals, the minimum gain is +0db @ 54mhz to +7.5db gain @ 1000mhz.
- this is a tv signal amplifier that provides one input and four outputs for connecting multiple tv sets or cable boxes. allow multiple devices to be connected to the antenna or cable system without loss of signal quality.
- use digital cables to prevent image pixelation and enhance antenna (ota) signals for distribution to multiple tvs. may improve the performance of the cable modem. may improve hdtv reception. including amplifier, power supply and two 75 ohm terminator.
- suitable for antenna or cable tv use. compatible with all standard and digital cable tv services, ota antenna reception. it is not compatible with the existing amplifier or pre-amplifier system. not compatible with satellite systems.
- meets or exceeds all scte standards. ptc short circuit protection ul listed adapters-self-resetting circuit protection provides safe short circuit protection to minimize power outage time. the amplifier has a 6 kv ring wave surge design to prevent voltage spikes. operating temperature: -40 to +60 ºc (-40ºf to +140ºf). 15 psi weatherproof seal.
6. 24Db Distribution Amplifier – Digital TV Antenna Booster Signal Amplifier, Adjustable Boost/Gain, NTSC, ATSC, FM, UHF, VHF – 1000 Mhz – Includes RG6 Coaxial Cable
- including: 1 tv antenna distribution amplifier and 1 rg6 coaxial cable fta, ota
- features: heavy metal shell, built-in coaxial installation port, power indicator light, adjustable gain control and return path
- quality assurance: this tv amplifier has high-quality commercial gradeconstruct and include u.s. manufacturer warranty
- very suitable: this 24db distribution amplifier is used to enhance the signal reception from the antenna to the tv, providing high output capability and minimal distortion
7. Channel Master Ultra Mini 8 TV Antenna Amplifier, TV Antenna Signal Booster With 8 Outputs For Connecting Antenna Or Cable TV To Multiple Televisions (CM-3418),White
- improve signal strength, reduce pixelation and possibly increase the number of channels
- mini size for space-saving installation
- the powder coating and weatherproof housing allow indoor or outdoor installation in any climate
- eight amplified output ports (4 db)
- installation with all tv antennas and cable tv (not compatible with satellites)
8. 2-Port Bi-Directional Cable TV HDTV Amplifier Splitter Signal Booster With Passive Return Path
- ultra-small size, easy to install in a limited space
- compatible with all standards and digital cable tv services
- use digital cables to reduce snow and prevent image pixelation.coaxial cable is not included.
- 2 ports, each port has a +11db boost, increasing your signal strength by 12 times.
- 5-year warranty purchased from an authorized pct distributor/reseller.when purchased through other channels, the warranty is invalid.
9. GE Indoor TV Antenna Amplifier Low Noise Antenna Signal Booster Clears Up Pixelated Low-Strength Channels HD TV Digital VHF UHF AC Power Adapter Black 42178
- low noise amplification-improve the signal-to-noise ratio and compensate for cable loss to provide an excellent viewing experience.improve vhf and uhf reception and enhance digital tv signals.
- us-based technical support – supported by a limited lifetime replacement commitment and free us-based technical support, which can be provided from monday to friday from 7 am to 8 pm central time to helpresolve any problems or problems.
- signal enhancer-this amplifier will enhance and strengthen the signal received by the indoor non-amplified passive tv antenna.the amplifier will clear any low-intensity blur or pixelated channels-in some cases, the number of channels you receive may vary based on your distance from the local radio tower.
- easy to install – connect the indoor tv antenna to the amplifier. connect the amplifier to the tv. connect the ac power adapter (supplied) to a nearby wall outlet and perform a new channel scan.this amplifier is for indoor use only.
10. 36 DB Cable Antenna Color TV Booster Signal Amplifier VHF UHF FM HDTV
- fm trap/switch indicator
- uhf vhf fm distribution amplifier for tv/recorder
- 36db gain control signal booster
- 1 input / 1 output